<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The Effect of Microwave Radiation on Flotation of Copper Sulfide Minerals</ArticleTitle>
<VernacularTitle>تاثیر تابش امواج ماکرو بر فلوتاسیون کانی های سولفیدی مس</VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>12</LastPage>
			<ELocationID EIdType="pii">2238</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2238</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>بهناز</FirstName>
					<LastName>میرشکاری</LastName>
<Affiliation>کارشناس ارشد فرآوری مواد معدنی،دانشگاه تربیت مدرس</Affiliation>

</Author>
<Author>
					<FirstName>سید محمد جواد</FirstName>
					<LastName>کلینی</LastName>
<Affiliation>عضو هیئت علمی دانشگاه تربیت مدرس تهران</Affiliation>

</Author>
<Author>
					<FirstName>بهزاد</FirstName>
					<LastName>شهبازی</LastName>
<Affiliation>گروه فرآوری مواد معدنی دانشگاه تربیت مدرس</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>04</Month>
					<Day>07</Day>
				</PubDate>
			</History>
		    <Abstract>Flotation is one of the most important methods of mineral processing that its efficiency is affected by two factors of surface chemistry and liberation degree. In this research, the effect of microwave radiation on the surface chemistry and liberation degree of copper sulfide minerals was investigated for obtaining suitable methods for pretreatment of two different ores (Sarcheshmeh and Palangi). In flotation studies on the effect of microwave radiation on the surface chemistry, after 90 seconds radiation (550 W), the concentrate grade and recovery of the Sarcheshmeh samples increased 7 and 2 percent, respectively but the concentrate grade and recovery of the Palangi samples decreased 4 and 8 percent, respectively. Also, in flotation studies on the effect of microwave radiation on the liberation degree, after 180 seconds radiation (550 W), the concentrate grade and recovery of the Sarcheshmeh samples increased 4 and 6 percent respectively but for the Palangi samples, a same increase in the grade and recovery was obtained in 600 seconds of microwave radiation. Furthermore, flotation rate constant of the Sarcheshmeh and Palangi samples increased 0.2 and 0.1 per minute respectively, after 120 seconds microwave radiation.</Abstract>
			<OtherAbstract Language="FA">فلوتاسیون یکی از مهمترین روشهای فرآوری مواد معدنی است که کارآیی آن تحت تاًثیر دو عامل شیمی سطح و درجه آزادی است. در این تحقیق تاًثیر تابش امواج ماکرو بر شیمی سطح و درجه آزادی کانیهای سولفیدی مس با هدف یافتن روش پیش-عمل آوری مناسب برای دو کانسنگ مختلف (سرچشمه و پلنگی) بررسی شد. در آزمایشهای فلوتاسیون بر روی تاًثیر تابش امواج ماکرو بر شیمی سطح، عیار و بازیابی نمونه‌ مس سرچشمه پس از 90 ثانیه تابش (550 وات) به ترتیب 7 و 2 درصد افزایش یافت، اما در نمونه مس پلنگی عیار و بازیابی به ترتیب 4 و 8 درصد کاهش یافت. همچنین آزمایشهای فلوتاسیون بر روی تاًثیر تابش امواج ماکرو بر درجه آزادی نشان داد که برای افزایش عیار و بازیابی نمونه مس سرچشمه به ترتیب به میزان 4 و 6 درصد نیاز به 180 ثانیه تابش امواج ماکرو با توان 550 وات است اما در نمونه مس پلنگی برای همین میزان افزایش در عیار و بازیابی، نیاز به 600 ثانیه تابش امواج ماکرو است. علاوه بر این، ثابت نرخ فلوتاسیون نمونه های مس سرچشمه و پلنگی پس از 120 ثانیه تابش امواج ماکرو به ترتیب 0/2 و 0/1 بر دقیقه افزایش یافت.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">امواج ماکرو</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فلوتاسیون</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کالکوسیت</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کالکوپیریت</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2238_2952351097998ac1240cb2ab7333a3d2.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A study on performance of PVC/MWCNTs nanocomposite membranes in humic acid solution filtration</ArticleTitle>
<VernacularTitle>بررسی عملکرد غشاهای نانوکامپوزیتی PVC/MWCNTs در فیلتراسیون محلول هیومیک اسید</VernacularTitle>
			<FirstPage>13</FirstPage>
			<LastPage>25</LastPage>
			<ELocationID EIdType="pii">2239</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2239</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سپیده</FirstName>
					<LastName>معصومی</LastName>
<Affiliation>گروه مهندسی شیمی، دانشگاه محقق اردبیلی، اردبیل، ایران</Affiliation>

</Author>
<Author>
					<FirstName>علیرضا</FirstName>
					<LastName>میراولیایی</LastName>
<Affiliation>مهندسی شیمی، فنی و مهندسی، محقق اردبیلی، اردبیل، ایران</Affiliation>

</Author>
<Author>
					<FirstName>یونس</FirstName>
					<LastName>جعفرزاده</LastName>
<Affiliation>دانشکده مهندسی شیمی، دانشگاه صنعتی سهند، تبریز، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>07</Month>
					<Day>24</Day>
				</PubDate>
			</History>
		    <Abstract>In this research, the effect of multiwall carbon nanotubes (MWCNTs) on the performance of polyvinyl chloride (PVC) membrane in the filtration of humic acid solution was investigated. The FESEM results showed that the number of surface pores in nanocomposite membranes is more than that of PVC membrane. The tensile strength and abrasion resistance of membranes increased with increasing MWCNTs up to 0.3 wt.%. It was also observed that water ﬂux of membrane containing 0.3 wt.% MWCNTs increases up to 484.7 L/m2h. The decrease of water contact angle from 88.6° for PVC membrane to 70.2° for 0.3 wt.% MWCNTs membrane showed that the hydrophilicity of membranes increases with increasing MWCNTs. It was also found that the rejection of humic acid solution with MWCNTs membranes is more than that of PVC membrane. The analysis of fouling mechanism of membranes revealed that the cake formation model is dominant mechanism for all membranes and cake filtration-complete blockage model fits the volume-time data.</Abstract>
			<OtherAbstract Language="FA">در این تحقیق، اثر نانو لوله‌ های کربنی چند جداره (MWCNTs) بر عملکرد غشای پلی وینیل کلراید (PVC) در فیلتراسیون محلول هیومیک اسید بررسی شد. نتایج FESEM نشان داد که تعداد حفرات سطحی در غشا های نانو کامپوزیتی نسبت به غشای PVC بیشتر است. با افزایش MWCNTs تا 3/0 درصد وزنی، مقاومت های مکانیکی و سایشی غشاها افزایش یافت. همچنین مشاهده شد که شار آب غشای محتوی 3/0 درصد وزنی MWCNTs تا L/m2h 7/484 افزایش می یابد. کاهش زاویه تماس آب از° 6/88 برای غشای PVC به° 2/70 برای غشای محتوی 3/0 درصد MWCNTs نشان داد که آب دوستی غشاها با افزودن MWCNTs افزایش می یابد. همچنین مشخص شد که پس زنی محلول هیومیک اسید با غشاهای محتوی MWCNTs نسبت به PVC بیشتر است. آنالیز مکانیسم گرفتگی غشاها آشکار کرد که مدل تشکیل کیک مکانیسم غالب برای همه غشاها است و مدل فیلتراسیون کیک-گرفتگی کامل داده‌های حجم-زمان را برازش می‌کند.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">غشای نانوکامپوزیتی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">پلی وینیل کلراید</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">نانولوله‌ کربنی چندجداره</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تصفیه آب</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">هیومیک اسید</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2239_487d4c6a324446b3fa45b30cfcee5337.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigation of Operational parameters and Optimization of  Flue Gas Carbon Dioxide Absorption Process by Diethanolamine via Response Surface Methodology</ArticleTitle>
<VernacularTitle>بررسی اثر متغیرهای عملیاتی و بهینه سازی فرایند جذب دی‌اکسیدکربن از گاز حاصل از احتراق توسط دی‌اتانول‌آمین با استفاده از روش سطح-پاسخ</VernacularTitle>
			<FirstPage>26</FirstPage>
			<LastPage>40</LastPage>
			<ELocationID EIdType="pii">2240</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2240</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>ساسان</FirstName>
					<LastName>صحرایی</LastName>
<Affiliation>کارشناسی ارشد مهندسی شیمی، دانشگاه صنعتی کرمانشاه</Affiliation>

</Author>
<Author>
					<FirstName>حامد</FirstName>
					<LastName>رشیدی</LastName>
<Affiliation>گروه مهندسی شیمی- دانشکده انرژی- دانشگاه صنعتی کرمانشاه</Affiliation>

</Author>
<Author>
					<FirstName>پیوند</FirstName>
					<LastName>والهءشیدا</LastName>
<Affiliation>گروه مهندسی شیمی، هیئت علمی دانشگاه صنعتی کرمانشاه</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>10</Month>
					<Day>10</Day>
				</PubDate>
			</History>
		    <Abstract>In this study, to evaluate the performance of aqueous diethanolamine (DEA) CO2 absorption process from flue gas, the volumetric overall gas phase mass transfer coefficient (KGaV) and the volumetric mass flux (NAaV) was investigated under different operating conditions, including: inlet solvent temperature 35-55 °C, the CO2 concentration in flue gas 5-15 vol.%, flue gas flow rate 50-100 lit/min, solvent flow rate 0.75- 1.25 lit/min, DEA concentration 15-25 wt.% and reboiler heat load:1.4-2.2 kW. To evaluate the results and optimize the conditions, the Box-Behnken Response Surface methodology was used. The results showed that by increasing solvent flow rate, gas flow rate, reboiler heat load and DEA concentration in the solvent, the NAaV and KGaV values were increased. However, increasing the CO2 concentration in the flue gas increased NAaV, and decreased KGaV. The temperature changes and carbon dioxide concentration through the absorption column showed that carbon dioxide absorption was more in the higher ratio of solvent flow to gas flow rate. However, increasing the length of the column increases the CO2 absorption. Finally, optimization of the operating conditions has been done. The maximization of NAaV and KGaV simultaneously was considered as objective function. At optimal operating conditions, the NAaV and KGaV values reached 15.01 (kmol/h.m3) and 3.07 (kmol / h.m3.kPa), respectively.</Abstract>
			<OtherAbstract Language="FA">در این پژوهش به منظور بررسی عملکرد محلول آبی دی‌اتانول‌آمین در فرایند جذب دی‌اکسیدکربن از گاز حاصل از احتراق، ضریب کلی انتقال جرم بر مبنای فاز گاز (KGaV) و شار انتقال جرم حجمی (NAaV) در شرایط عملیاتی مختلف شامل: دمای حلال ورودی 55-35 درجه سلسیوس، دبی گاز ورودی 100-50 لیتر بر دقیقه، دبی حلال ورودی 25/1-75/0 لیتر بر دقیقه، غلظت دی‌اکسیدکربن در گاز ورودی 15-5 درصد حجمی، بار حرارتی جوش‌آور 2/2-4/1 کیلووات و غلظت دی‌اتانول‌آمین در حلال 25-15 درصد وزنی، مورد بررسی قرار گرفت. جهت تحلیل نتایج و بهینه‌سازی شرایط از روش سطح-پاسخ باکس-بنکن استفاده شد. نتایج نشان داد که افزایش دبی حلال، دبی گاز، بار حرارتی جوش‌آور و غلظت دی‌اتانول‌آمین در حلال موجب افزایش مقادیر NAaV و KGaV می‌شود. با این حال افزایش غلظت دی‌اکسیدکربن در گاز ورودی مقدار NAaV و KGaV را به ترتیب افزایش و کاهش داد. تغییرات دما و غلظت دی‌اکسیدکربن در طول برج جذب نشان داد که جذب دی‌اکسیدکربن در نسبت‌های بالاتر دبی حلال به دبی گاز بیشتر می‌شود. با این حال افزایش طول برج بر افزایش میزان جذب تاثیرگذار است. در پایان بهینه‌سازی شرایط عملیاتی برج جذب انجام پذیرفت. حداکثر بودن همزمان مقدار NAaV و KGaV، تابع هدف در نظر گرفته شد. در شرایط عملیاتی بهینه مقادیر NAaV و KGaV به ترتیب به (kmol/h.m3) 01/15 و (kmol/h.m3.kPa) 07/3 به‌دست آمد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">جذب</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دی‌اکسیدکربن</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دی‌اتانول‌آمین</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">روش سطح-پاسخ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">برج پرشده</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2240_d4dd111a4fd973394238aca5c05bebe3.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Modeling of Methylene Blue Adsorption on the Surfactant-Modified Tea Waste by the Artificial Neural Network</ArticleTitle>
<VernacularTitle>مدل سازی جذب سطحی متیلن بلو بر روی تفاله چای اصلاح شده با سورفکتانت با استفاده از شبکه عصبی مصنوعی</VernacularTitle>
			<FirstPage>41</FirstPage>
			<LastPage>52</LastPage>
			<ELocationID EIdType="pii">2242</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2242</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>فاطمه</FirstName>
					<LastName>اسماعیلی خلیل سرایی</LastName>
<Affiliation>استادیار (ریاضی محض)،
دانشکده فنی فومن،
پردیس دانشکده های فنی،
دانشگاه تهران</Affiliation>

</Author>
<Author>
					<FirstName>ازاده</FirstName>
					<LastName>ابراهیمیان پیربازاری</LastName>
<Affiliation>دانشکده فنی فومن، پردیس دانشکده های فنی دانشگاه تهران</Affiliation>

</Author>
<Author>
					<FirstName>ندا</FirstName>
					<LastName>اساسیان کلور</LastName>
<Affiliation>استادیار مهندسی شیمی، 
دانشکده فنی فومن، 
پردیس دانشکده های فنی،
دانشگاه تهران</Affiliation>
<Identifier Source="ORCID">0000-0001-8676-480X</Identifier>

</Author>
<Author>
					<FirstName>امین</FirstName>
					<LastName>سهرابی</LastName>
<Affiliation>دانشجوی کارشناسی ارشد مهندسی شیمی، گرایش فرایندهای جداسازی، دانشکده فنی فومن، پردیس دانشکده های فنی دانشگاه تهران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>08</Month>
					<Day>28</Day>
				</PubDate>
			</History>
		    <Abstract>The adsorption process modeling of Methylene Blue dye (MB+) on the modified tea waste (TW) with anionic surfactant (SDS) was performed by the artificial neural network. The FTIR and EDS analyses were used to investigate the presence of SDS molecules on the adsorbent surface and it was determined that the SO3- anions help to MB+ adsorption by the ion exchange mechanism. The adsorption isotherm data were fitted to Langmuir and Freundlich isotherm equations and the Langmuir adsorption capacity (Qmax) was calculated respectively, equal to 124.3 and 156.2 mg/g for TW and STW. It was observed that the adsorption kinetics of MB follows the pseudo-second-order kinetic model. The findings of this investigation suggest that physical adsorption also plays a role in controlling the sorption rate of MB. The feedforward ANN model with 5 input parameters and one hidden layer having 15 neurons was designed to predict the adsorptive behavior of sorbents, and it was observed that the model is able to predict the MB removal percentage for the test data series with great R2&gt;0.97.</Abstract>
			<OtherAbstract Language="FA">مدل‌سازی فرایند جذب سطحی رنگ‌دانه متیلن بلو (+MB) بر روی تفاله چای (TW) اصلاح‌شده با سورفکتانت آنیونی (SDS) با استفاده از شبکه عصبی مصنوعی انجام شد. آزمون‌های FTIR و EDS برای بررسی حضور مولکول‌های SDS بر سطح جاذب استفاده و مشخص شد که آنیون‌های -SO3 از طریق مکانیسم‌ تبادل یونی به جذب +MB کمک می‌کنند. نتایج ایزوترم جذب با معادلات ایزوترم لانگمویر و فرندلیچ تطبیق داده شد و ظرفیت جذب لانگمویر (Qmax)، به ترتیب برابر 124.3 و 156.2 میلی گرم بر گرم برای TW و STW محاسبه گردید. مشاهده شد که سینتیک جذب متیلن بلو از مدل سینتیکی شبه درجه دوم پیروی می کند. نتایج این بررسی پیشنهاد می کند که جذب فیزیکی نیز در کنترل سرعت جذب متیلن بلو نقش دارد. مدل شبکه عصبی مصنوعی پیش خور با 5 پارامتر ورودی و یک لایه پنهان دارای 15 نورون برای پیش بینی رفتار جذبی طراحی و مشاهده شد که مدل با R2 بسیار بالایی (0.97&lt;) قادر به پیش بینی درصد حذف MB برای مجموعه داده های آزمایش است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">تفاله چای</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">سورفکتانت آنیونی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">جذب متیلن بلو</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مدل‌سازی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">شبکه عصبی مصنوعی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2242_1a3f91fead97497b1a96d6104ad339f6.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Separation of Ammonia from Wastewater by Photocatalyst/Membrane Process Hybrid System</ArticleTitle>
<VernacularTitle>جداسازی آمونیاک از پساب با استفاده از سیستم ترکیبی فتوکاتالیست/فرآیند غشایی</VernacularTitle>
			<FirstPage>53</FirstPage>
			<LastPage>63</LastPage>
			<ELocationID EIdType="pii">2243</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2243</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>مهرداد</FirstName>
					<LastName>فرامرزی</LastName>
<Affiliation>گروه مهندسی شیمی، دانشکده نفت و مهندسی شیمی، دانشگاه رازی، کرمانشاه، ایران</Affiliation>

</Author>
<Author>
					<FirstName>مهدی</FirstName>
					<LastName>امیری نژاد</LastName>
<Affiliation>دانشکده مهندسی شیمی و نفت، دانشگاه رازی، کرمانشاه، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-8932-7111</Identifier>

</Author>
<Author>
					<FirstName>شهرام</FirstName>
					<LastName>شریف نیا</LastName>
<Affiliation>گروه آموزشی مهندسی شیمی، دانشکده نفت و مهندسی شیمی، دانشگاه رازی، کرمانشاه، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-5469-7219</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>10</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>In this research, the performance of photocatalyst/membrane process hybrid system was investigated for the ammonia removal from the wastewater. The prepared membranes were ultrafiltrasion (UF) using the polyethersulfone (PES) by the phase inversion method. Synthetic fumarat alumoxan nanoparticle was used as the additive in the preparation of membrane. The photocatalyst was zinc oxide (ZnO) fixed on a light expanded clay aggregate support named LECA. The effect of the parameters containing amonia initial concetration, nanoparticle content and the treatment process duration on the amonia removal was investigated. The photocatalyst and membrane systems were employed separately and their performance including the flux and rejection was compared with the hybrid system. The results showed that the photocatalyst system was able to remove the amonia at high flux level, well. By consideration of the amonia flux and its removal percentage, the best performance was obtained for the membrane prepared by the PES with 2 wt.% nanoparticle. In hybrid system, firstly, the ammonia was reached to the low concentration and then, the membrane peocess removed this low concentration of ammonia.</Abstract>
			<OtherAbstract Language="FA">در این تحقیق، عملکرد سیستم ترکیبی فتوکاتالیست/فرآیند غشایی در حذف آمونیاک از پساب مورد بررسی قرار گرفت. غشا از نوع الترافیلتراسیون بوده که با استفاده از پلیمر پلی‌اتر‌سولفون به روش تغییر فاز ساخته شد. از نانوذرات سنتز شده فومارات آلوموکسان به عنوان افزودنی در ساخت غشا استفاده گردید. نوع فتوکاتالیست اکسید روی بوده که بر روی پایه دانه‌ رس منبسط شده با نام لیکا پوشش داده شد. تاثیر عوامل غلظت اولیه آمونیاک، میزان نانوذره و زمان فرآیند تصفیه بر روی حذف آمونیاک مورد بررسی قرار گرفت. سیستم‌های فتوکاتالیست و غشایی به طور منفرد نیز به کار گرفته و عملکرد آن‌ها از نظر شار و درصد حذف آمونیاک با سیستم ترکیبی مورد مقایسه قرار گرفتند. نتایج نشان دادند که سیستم فتوکاتالیست به تنهایی فقط در غلظت‌های بالا بخوبی می‌تواند آمونیاک را حذف نماید. در بین غشاهای ساخته شده، غشای پلی‌اترسولفون با میزان 2% وزنی نانوذره از نظر شار خوراک و درصد حذف آمونیاک بهترین عملکرد را داشت. در سیستم ترکیبی، ابتدا در فتوکاتالیست، آمونیاک به غلظت پایین‌تری رسیده و درادامه، فرآیند غشایی غلظت پایین آمونیاک را با درصد بالاتری حذف نمود.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">فتوکاتالیست</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">غشا</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">آمونیاک</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">پلی‌اترسولفون</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فومارات آلوموکسان</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2243_90aef91f0d9e7c3be322bd7bae41617d.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Modeling of microbial growth of Ralstonia eutropha in ‎biodegradation process of phenol in an airlift bioreactor with ‎concentric net draft ‎</ArticleTitle>
<VernacularTitle>مدل‌سازی رشدمیکروبی باکتری رالستونیا یوتروفا در تخریب زیستی فنول در ‏راکتور هواراند با لوله مشبک مرکزی</VernacularTitle>
			<FirstPage>64</FirstPage>
			<LastPage>75</LastPage>
			<ELocationID EIdType="pii">2244</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2244</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>الهام</FirstName>
					<LastName>جلیل نژاد</LastName>
<Affiliation>گروه مهندسی شیمی، دانشگاه صنعتی ارومیه، ارومیه، ایران</Affiliation>

</Author>
<Author>
					<FirstName>سیده مژگان</FirstName>
					<LastName>حسینی</LastName>
<Affiliation>گروه مهندسی شیمی، دانشگاه صنعتی ارومیه، ارومیه، ایران</Affiliation>

</Author>
<Author>
					<FirstName>مهران</FirstName>
					<LastName>نعلبند</LastName>
<Affiliation>گروه مهندسی شیمی، دانشگاه صنعتی ارومیه، ارومیه، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>07</Month>
					<Day>28</Day>
				</PubDate>
			</History>
		    <Abstract>According to the experimental observations, airlift reactor with net draft tube provided a ‎suitable ‎medium for microbial reactions, hence improved process efficiency and is a ‎recommended ‎bioreactor for wastewater bio-treatment. However, modeling and simulation ‎of biodegradation ‎process in this special bioreactor seems essential to proper design and ‎optimization of the ‎performance of the reactor. In this work, the biodegradation process of ‎phenol with Ralstonia ‎eutropha cells and microbial growth is simulated in a lab-scale airlift ‎reactor with net draft tube ‎using computational fluid dynamics (CFD). The k-ɛ model, as the most common model used for ‎description of turbulent flow, is used for the simulation of the present bubbly flow. Flow pathlines ‎in the riser and downcomer sections of the airlift reactor is simulated and the phenol concentration ‎variations and ‎biomass distribution in different inlet conditions were demonstrated by ‎simulated ‎concentrations contours. Good agreement was find between simulation and ‎experimental ‎results which validated the model and proved the accuracy of the simulation.‎</Abstract>
			<OtherAbstract Language="FA">بر اساس مشاهدات تجربی راکتور هواراند با لوله مشبک داخلی به دلیل مهیا کردن شرایط مناسب جهت رشد میکروبی، بازدهی فرآیند ‏زیستی را به میزان قابل‌توجهی افزایش داده و یکی از بیوراکتورهای پرکاربرد در تصفیه پساب به روش بیولوژیکی است. از این رو ‏مدل‌سازی و شبیه‌سازی فرآیند تخریب‌زیستی در این راکتور برای مقاصد طراحی و بهینه‌سازی عملکرد راکتور ضروری است. در این ‏پژوهش فرآیند تخریب زیستی فنل توسط باکتری رالستونیا یوتروفا و رشد توده‌زیستی در راکتور هواراند با لوله مشبک داخلی ‏آزمایشگاهی به روش دینامیک سیالات محاسباتی(‏CFD‏) شبیه‌سازی شد. برای روابط جریان حبابی از مدل آشفته є-‏k؛ متداو‌ترین ‏مدل به کار رفته برای تشریح جریان‌های آشفته استفاده شد. خطوط جریان در نواحی بالارونده و پایین‌رونده در داخل راکتور هواراند ‏با لوله مشبک داخلی شبیه‌سازی شده و تغییرات غلظت فنل و پراکندگی غلظت توده‌‌زیستی در شرایط ورودی مختلف با به تصویر ‏کشیدن پروفیل‌های غلظت بدست‌آمد. تطابق خوب نتایج حاصل با داده‌های تجربی نشان از اعتبار مدل و صحت شبیه‌سازی است. ‏. ‏</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">شبیه‌سازی‎ CFD</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">رشد توده زیستی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">راکتور هواراند</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تخریب‌زیستی فنل</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مدل هلدین</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2244_3147da8ab4a0437c15ef51a5cc7f2dc4.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Competitive adsorption of three metal ions Cr(VI), Pb(II) and Hg(II) in the aqueous solutions over the magnetic activated carbon derived from peach stone</ArticleTitle>
<VernacularTitle>جذب سطحی رقابتی سه یون فلزی کروم، سرب و جیوه در محلول‌های آبی بر روی کربن فعال مغناطیسی تهیه شده از هسته هلو</VernacularTitle>
			<FirstPage>76</FirstPage>
			<LastPage>88</LastPage>
			<ELocationID EIdType="pii">2245</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2245</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>محمدحسین</FirstName>
					<LastName>فاتحی دهاقانی</LastName>
<Affiliation>دانشگاه صنعتی شریف، دانشکده مهندسی شیمی و نفت، تهران، ایران</Affiliation>

</Author>
<Author>
					<FirstName>محمد</FirstName>
					<LastName>ذبیحی</LastName>
<Affiliation>دانشگاه صنعتی سهند، دانشکده مهندسی شیمی، تبریز، ایران</Affiliation>

</Author>
<Author>
					<FirstName>جلال الدین</FirstName>
					<LastName>شایگان</LastName>
<Affiliation>دانشگاه صنعتی شریف، دانشکده مهندسی شیمی و نفت، تهران، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>11</Month>
					<Day>21</Day>
				</PubDate>
			</History>
		    <Abstract>The aim of this present work is the synthesis of the functionalized magnetic activated carbon derived from peach stone for simultaneous removal of heavy metal ions from aqueous solutions. The various tests including XRD, BET, XRF, Boehm, VSM and FTIR were applied to characterize the prepared nano-adsorbent. The results showed the well dispersed spherical magnetite nanoparticles with size of 20 nm were formed over the nano-adsorbent while the surface area was calculated to be 325 m2/g. The Designed experimental data by employing response surface method indicated that the adsorption temperature and pH have the synergic effect on the competitive adsorption of Pb(II), Cr(VI) and Hg(II) in the liquid phase. The maximum removal efficiencies were calculated to be 91.5, 62.05 and 82.7 for Pb (II), Cr(VI) and Hg(II) at the optimal operating conditions, respectively.</Abstract>
			<OtherAbstract Language="FA">هدف از پروژه حاضر سنتز یک نانو جاذب مغناطیسی عامل‌دار با استفاده از کربن فعال تهیه‏ شده از هسته هلو با بکارگیری روش هم‌رسوبی برای حذف هم‏زمان یون فلزات سنگین از محلول آبی است. آنالیزهای مختلفی شامل بوهم، پراش اشعه ایکس، سطح فعال، میکروسکوپ الکترونی روبشی، طیف‏نگاری فلورسانس پرتو ایکس و مغناطیس‌سنج ارتعاشی برای تعیین ساختار سطحی نانو جاذب سنتز شده مورد مطالعه قرار گرفتند. نتایج نشان داد که نانو جاذب مغناطیسی با توزیع مناسب کریستال‏های اکسید آهن با اندازه 20 نانومتر بر روی سطح کربن فعال به صورت کروی با سطح فعال 325 مترمربع بر گرم شکل گرفته است. داده‌های آزمایشگاهی طراحی شده با روش پاسخ سطح، نشان داد که دمای جذب و قلیاییت محیط دارای اثر هم‏افزایی در مقدار جذب رقابتی یون‌های سرب، کروم و جیوه در فاز مایع هستند. حداکثر درصد حذف یون جیوه، کروم و سرب به ترتیب 91/5، 62/05 و 82/7 در شرایط بهینه محاسبه شد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">کربن فعال مغناطیسی هسته هلو</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">جذب سطحی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">سرب</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کروم</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">جیوه</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2245_10907813b97e249163587e6246612e21.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه شهید باهنر کرمان و انجمن مهندسی شیمی ایران</PublisherName>
				<JournalTitle>نشریه علوم و مهندسی جداسازی</JournalTitle>
				<Issn>2008-3963</Issn>
				<Volume>11</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Water recovery improvement at GOLEGOHAR line 4 (POLYCOM) tailing thickener using feed system optimization</ArticleTitle>
<VernacularTitle>افزایش بازیابی آب در تیکنر باطله خط چهارم تولید کنسانتره معدن گل‌گهر با استفاده از بهینه‌سازی سیستم خوراک‌دهی به تیکنر</VernacularTitle>
			<FirstPage>89</FirstPage>
			<LastPage>102</LastPage>
			<ELocationID EIdType="pii">2258</ELocationID>
			
<ELocationID EIdType="doi">10.22103/jsse.2019.2258</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سید علیرضا</FirstName>
					<LastName>عقیلی</LastName>
<Affiliation>انتقال حرارت و سیالات، دانشکده مهندسی مکانیک، دانشگاه صنعتی امیرکبیر، تهران، ایران</Affiliation>

</Author>
<Author>
					<FirstName>نادر</FirstName>
					<LastName>منتظرین</LastName>
<Affiliation>انتقال حرارت و سیالات، مهندسی مکانیک، دانشگاه صنعتی امیرکبیر، تهران، ایران</Affiliation>

</Author>
<Author>
					<FirstName>شهرام</FirstName>
					<LastName>هاشمی مرغزار</LastName>
<Affiliation>رییس هیئت مدیره شرکت مهندسین مشاور آماتیس رابین، تهران، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>08</Month>
					<Day>18</Day>
				</PubDate>
			</History>
		    <Abstract>Currently water saving and recycling is necessary for construction and development of mineral processing industry, affected by water resources restriction, the cast of waste accumulation and environmental consequences. Thickener is one of the most important elements at water recovery from waste water. In this study, first operating thickener condition is investigated. Computational fluid dynamics is used to simulate thickener operation with the approach of water saving increasement and the simulation is validated by conventional experiments. Devise’s failure is detected in inability of feedwell at mixing the fluid currents and flocculants. Thickeners capacity increasement due to changes in feed load from design to operating condition is discussed and two short term solution based on flocculant dosage change and long term solution based on feedwell design are presented. 4 new feedwells are designed compatible with operating condition in order to optimize the thickener. The new feedwells by properties of surface dilution (feedwell No.3) and underground dilution and converging output current (feedwell No.4) are introduced as optimized feedwells. In order to deployment any of them respectively, water saving will be more than 1.07 and 1.34 million m^3 per a year. One of the other advantage of these feedwells is overflow discharge water clarification or in other words high solid concentration at underflow discharge.</Abstract>
			<OtherAbstract Language="FA">بازیابی و صرفه‌جویی در مصرف آب، که متأثر از محدودیت منابع آبی و نیز هزینه‌های انباشت باطله و در کنار آن تبعات زیست‌محیطی رهاسازی باطله‌های تر می‌باشد، اکنون به‌عنوان یک الزام در احداث و توسعه صنایع فراوری معدنی به‌حساب می‌آید. یکی از مهم‌ترین عناصر در فرایند بازیابی آب از باطله‌های تر فراوری تیکنر می‌باشد. در این مطالعه نخست وضعیت کارکرد شرایط حاضر تیکنر باطله خط چهارم تولید کنسانتره شرکت معدنی و صنعتی گل‌گهر بررسی گردیده است. با رویکرد افزایش بازیابی آب و نیز بهبود عملکرد تیکنر باطله یادشده، از دینامیک سیالات محاسباتی برای شبیه‌سازی استفاده‌شده و با انجام آزمایش‌های متعارف روی تیکنر در حال کار، این شبیه‌سازی اعتبار سنجی گردیده است. نارسایی دستگاه در عدم توانایی چاهک خوراک در مخلوط کردن جریان‌ها و فلوکولانت و درنتیجه کاهش ظرفیت فرایند تیکنراسیون ناشی از تغییر شرایط کارکرد طراحی و تغییر خوراک، با این شبیه‌سازی شناسایی و به‌تناسب با آن‌ها دو راهکار کوتاه‌مدت بر مبنای تغییر میزان فلوکولانت زنی و بلندمدت بر مبنای طراحی چاهک‌های متناسب با شرایط کارکرد جدید، که با شرایط طراحی اولیه متفاوت می‌باشند، به‌منظور بهینه‌سازی معرفی گردیدند. چاهک‌های جدید با ویژگی ایجاد سیستم ساده رقیق‌سازی در سطح (چاهک شماره 3) و نیز ایجاد سیستم رقیق‌سازی زیرسطحی (چاهک شماره 4) به‌عنوان چاهک‌های بهینه معرفی‌شده‌اند که در صورت استفاده از هر یک از آن‌ها به ترتیب بازیابی آب سالیانه به 1.07 و 1.34 میلیون مترمکعب بالغ خواهد شد. از خصوصیات دیگر این چاهک‌ها افزایش شفافیت آب در شرایط خروجی با غلظت بالای جامد در خروجی ته‌ریز است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">بازیابی آب</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">چاهک تغذیه</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">لخته سازی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">بهینه سازی تیکنر</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دینامیک سیالات محاسباتی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsse.uk.ac.ir/article_2258_2d3acd3e240c61820625fff66a19938f.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
