@article { author = {Dashtbozorg, Amirhosein and Saljoughi, Ehsan and Mousavi, Seyed Mahmoud and Kiani, Shirin and karkhanechi, Hamed}, title = {Preparation of enhanced nanofiltration membranes containing Cellulose acetate butyrate/Mxene nanoparticles for separation of salt and dye from water}, journal = {Journal of Separation Science and Engineering}, volume = {14}, number = {1}, pages = {72-90}, year = {2022}, publisher = {Shahid Bahonar University of Kerman Iranian Association of Chemical Engineering}, issn = {2008-3963}, eissn = {}, doi = {10.22103/jsse.2022.3316}, abstract = {In this study, for the first time, nanofiltration membranes containing cellulose acetate butyrate polymer and MXene nanoparticles were prepared and used to remove dye and salt from water. MXene nanoparticles were synthesized from Ti3AlC2 precursor and the existence of a layered structure as well as the formation of OH-functional group in them was proved. Then, Cellulose acetate butyrate nanofiltration membranes were prepared from MXene nanoparticles at concentrations of 0 to 4 wt.% and various characterizations were performed on the mentioned prepared membranes. The results showed that increase in concentration of MXene nanoparticles results in formation of membranes with higher porosity, hydrophilicity, pure water flux and flux recovery ratio. Also, with the addition of MXene to the polymer and increase in its concentration up to 3 wt.%, mechanical properties, including tensile strength, elastic modulus and elongation at breakpoint increased, while further increase in nanoparticle concentration decreased these properties. In all membranes up to 3 wt.% of nanoparticles, the rejection of methylene blue and methyl orange dyes as well as rejection of divalent salt were above 90%.}, keywords = {membrane,Nanofiltration,Cellulose acetate butyrate,Mxene}, title_fa = {تهیه آزمایشگاهی غشای نانوفیلتراسیون ارتقا یافته متشکل از سلولز استات بوتیرات/ نانوذرات مکسین برای حذف رنگ و نمک از آب}, abstract_fa = {در این پژوهش برای اولین بار نانوفیلترهای متشکل از پلیمر سلولزاستات بوتیرات و نانوذرات مکسین ساخته شده و برای حذف رنگ و نمک از آب مورد استفاده قرار گرفتند. به این منظور ابتدا نانوذرات مکسین از پیش ماده‌ی Ti3AlC2 سنتز شده و وجود ساختار لایه‌ای و نیز ایجاد گروه عاملی OH- در آنها‌ به اثبات رسید. سپس نانوفیلترهای سلولز استات بوتیرات در غلظت‌های 0 تا 4% وزنی از نانوذره ساخته شده و ارزیابی های مختلفی در خصوص آنها به انجام رسید. نتایج حاصله حاکی از افزایش تخلخل، کاهش زاویه تماس آب، افزایش شار آب و نیز ارتقای نسبت بازیابی شار غشاها با افزایش غلظت نانوذرات بود. همچنین با افزودن مکسین به پلیمر و افزایش غلظت آن تا 3% وزنی، ویژگی های مکانیکی، شامل استحکام کششی، مدول الاستیک و افزایش طول در نقطه ی شکست افزایش یافتند در حالی که افزایش بیش‌تر در غلظت نانوذره، افت این ویژگی‌ها را به دنبال داشت. در تمامی غشاها و تا سطح 3 درصد وزنی از نانوذرات، میزان دفع رنگ‌های متیلن آبی و متیل نارنجی و نیز نمک دو ظرفیتی، بالای 90% بود.}, keywords_fa = {غشا,نانوفیلتراسیون,سلولز استات بوتیرات,مکسین}, url = {https://jsse.uk.ac.ir/article_3316.html}, eprint = {https://jsse.uk.ac.ir/article_3316_308d92b221750a1274f9fa522bb36c0c.pdf} }